Fit Shiv V3 Fork

Fit Shiv V3 Fork

from 114.99

SHIV V.3

Our goal was to design and produce an extremely strong fork with plenty of tire clearance. After 2 years of R&D and a lot of investment in tooling, the Shiv V.3 is available with a quick 25mm offset. Here are a few features that make these forks so strong.

  • Using left and right specific investment cast drop-outs instead of traditional Cr-Mo plate, we’ve eliminated the weld gap on the inside of the drops, and were able to thicken up the drops toward the top making a much stronger drop-out/leg connection.

  • Seamless, swaged legs provide more strength than welded or fused caps-especially if pegs are installed. The ends of these legs are formed, not capped and welded so there is nothing to fracture.

  • A longer 166mm CNC’d steerer tube with increased wall thicknesses wherever possible and a 24mm x 1.5 compression cap with integrated race.

  • Tapered and butted legs provide tons of strength, crown weld surface, and peg clearance./li>

  • Post weld 4Q Baked heat-treatmentLEGS

  • DROPOUTS

  • STEERER TUBE

  • STEERER TUBE LENGTH

  • COMPRESSION

  • AXLE TO CROWN

  • OFFSET

  • WEIGHT

  • HEAT TREAT

  • Seamless Swaged (No Welded Cap)

  • Investment Cast

  • 1 Piece CNC-Machined 4130 CrMo

  • M24 X 1.5 Thread - 6mm Allen Slot

  • 320mm

  • 25mm

Color:
Quantity:
Add to Cart